- 3.5" TFT Color LCD display shows the working status and ECG waveform.
- Waveform can be checked before printing to save record paper.
- 12-lead simultaneous acquisition of ECG, digital signal processor, to get higher quality ECG waveforms through the AC filter, baseline filter and EMG filter
- Simultaneous display of 3/6/12 leads ECG waveform, and the state of printing mode, sensitivity, speed, filter etc., easy to interpret.
- Multiple printing modes and formats, e.g. auto 3*4 +1, auto 3*4,auto 2*6 +1, auto 2*6, auto 4*3, rhythm 4, rhythm 3, rhythm 2 and manual etc; the length of wave printing can be adjusted and the function of periodic printing is included to meet different requirements.
- The instrument has the function of regular auto-analysis and auto-interpretation of ECG waveform parameter, provides measurement parameters such as HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) and etc. Auto-interpretation conclusion will help improve working efficiency.
- The power supply includes both AC and DC. This device includes built-in lithium polymer rechargeable battery. It offers up to 4 hours standby time, prints up to 150 ECG waveforms and 90 minutes continuously to satisfy the need of visiting patients and physical examination.
- Built-in storage with large capacity, which stores more than 1000 cases, and easy for doctors to review.
- Multiple languages are supported including English, Spanish, Chinese and Turkish for operation; report can be printed in English or Chinese.
- Safety Type
Class I, Type CF applied part, which has defibrillation-proof applied part
Standard 12 leads
Floating and defibrillation protection
- Patient Leak Current
- Sampling Rate
- A/D Conversion
- Frequency Response
0.05Hz~150Hz (-3dB, + 0.4dB)
- Time Constant
>60dB, >100dB( Add filter)
- Polarization Voltage:
- Noise level
- AC filter
- Recording Paper
5mm/mV 10mm/mV 20mm/mV 40mm/mV Auto
- Paper speed
Auto mode: 25mm/s, 50mm/s
Rhythm mode: 25mm/s, 50mm/s
Manual mode: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s
- Power Supply
AC:220V ,50Hz (110V ,60 Hz)
DC: 7.4V, 3700 mAh rechargeable lithium battery
- Fuse Specification
2 pcs φ5×20mm AC time lag; T1.6A/250V(Power Supply:220V)
315mm(L) x 215mm(W) x 77mm(H)
- Net Weight
- Thermal Printing System
- EMG Interference Filter